What the LUDENS II tee actually asks of you
The LUDENS II Art T-Shirt is a 100% cotton tee with two printed areas you want to keep intact: Yoji Shinkawa artwork across the front and the Kojima logo on the left arm. Cotton is a durable, familiar fabric, but printed graphics sit on top of the fibers, so the way you wash and dry the shirt matters more than the cotton itself.
The catalog confirms the material and the two print locations. It does not supply a care label, water temperature, drying method, or ironing instructions. That means the routine below is built around protecting prints in general, not a manufacturer-prescribed procedure. Treat it as a sensible default and check the label inside your shirt when it arrives for any specific instruction that overrides it.
Catalog details that shape your care routine
- KOJIMA PRODUCTIONS LUDENS II Art T-Shirt: Made from 100% cotton. Cotton is washable and durable, but it can shrink or crease if handled roughly, so gentler settings are a reasonable default.

KOJIMA PRODUCTIONS LUDENS II Art T-Shirt - KOJIMA PRODUCTIONS LUDENS II Art T-Shirt: Yoji Shinkawa artwork printed on the front. The front graphic is the focal point; turning the shirt inside out and avoiding direct heat helps reduce abrasion and fading.
- KOJIMA PRODUCTIONS LUDENS II Art T-Shirt: Kojima logo printed on the left arm. The sleeve print is easy to overlook when folding or ironing, so check the left arm before applying any heat.
- KOJIMA PRODUCTIONS LUDENS II Art T-Shirt: Available in White and Black, sizes Small through XX-Large. Color choice affects how fading shows: white hides light wear, while black can show fading and lint more readily, so both deserve the same gentle routine.
A simple washing routine for the front print and sleeve logo
These steps are general print-protection habits, not instructions confirmed by the supplied catalog. Use them as a starting point and defer to the shirt's own care label if one is present.
- Turn the shirt inside out: This puts the cotton face against the drum and the printed front and left-arm logo against the fabric itself, reducing surface rubbing during the cycle.
- Wash cold on a gentle cycle: Cold water and reduced agitation are commonly recommended for printed tees. The catalog does not specify a temperature, so choose the coolest setting that still cleans the shirt.
- Skip harsh additives: Avoid chlorine bleach and fabric softener on printed areas; both can degrade prints over time. A mild detergent is the safer default.
- Air dry or tumble low: High heat is the usual culprit behind cracked or faded prints. Hang the shirt or use the lowest dryer setting, and remove it while slightly damp.
- Check the left arm before ironing: If you iron, do it inside out and avoid pressing directly on the front artwork or the sleeve logo. The catalog does not confirm ironing guidance, so keep heat low and off the print.
Everyday habits that extend print life
- Wash it less often: Cotton tees can often be aired and spot-cleaned between wears. Fewer full wash cycles means less mechanical wear on both printed areas.
- Keep it away from rough surfaces: Backpacks, seatbelt edges, and textured chairs rub against the front print. Turning the shirt inside out for washing helps, but daily friction is the bigger long-term factor.
- Store folded rather than on a wire hanger: A wire hanger can stretch the shoulders of a cotton tee; folding keeps the shape and avoids pressure lines across the front artwork.
- Treat stains from the inside: Blot or rinse from the reverse side so you are not scrubbing the printed surface directly. The catalog does not list stain-removal instructions, so test any product on an inside hem first.
What the catalog does not tell you about care
The supplied product record for the LUDENS II Art T-Shirt does not include a care label, temperature guidance, drying instructions, or ironing rules. It also does not state whether the print is screen-printed, heat-transferred, or produced another way, and that distinction can affect how sensitive the graphic is to heat and abrasion.
Rather than guess, treat the routine above as a conservative baseline and read the label sewn into your shirt. If the label gives a specific temperature or drying method, follow it over any general advice here. If there is no label, the inside-out, cold-wash, low-heat approach is the least risky default for a 100% cotton tee with two printed areas.


