Start with what the metal print actually is
The Ludens Character Metal Print is a stainless steel poster made to celebrate 10 Years of KOJIMA PRODUCTIONS. It uses colour retouching, multi-colour layering, and a mix of silk screen and digital printing to turn the 10th Anniversary Ludens character artwork into a displayable object. At 172mm x 240mm x 1mm, it is closer to a small framed photo than a full-size wall poster, so plan for a desk, shelf, or compact wall spot rather than a large empty wall.
Each poster includes a magnet for easy display. That single supplied accessory is the most important fact for your setup: it means you do not need to guess at hanging hardware, and you can move the piece without leaving holes. The catalog does not describe the magnet's strength, shape, or mounting method, so treat it as a simple display aid and test it before trusting it with the print.
Catalog details that shape your display plan
- Ludens Character Metal Print: Poster Size: 172mm x 240mm x 1mm Use these measurements to choose a shelf, frame, or wall area before the print arrives.

Ludens Character Metal Print - Ludens Character Metal Print: Each poster includes a magnet for easy display, making it suitable for desks, shelves, workspaces, and collector environments. The included magnet is the supported mounting method; plan around it rather than drilling or framing first.
- Ludens Character Metal Print: Produced as a stainless steel poster with colour retouching multi-colour layering, also used silk screen x digital printing technique. The surface is metal with a printed artwork layer, so cleaning should be gentle and avoid abrasive tools.
- Ludens Character Metal Print: Only available on pre-order with delivery scheduled for November 2026. Plan your display space and any gift timing around the November 2026 delivery window.
How to display the Ludens metal print with the included magnet
The catalog confirms a magnet is included but does not describe how it attaches. Use this routine as a careful starting point, and stop if the print feels unstable.
- 1. Choose a flat, stable surface: The catalog lists desks, shelves, workspaces, and collector environments as suitable. Pick a spot where the print will not be knocked over and where the metal will not be exposed to constant moisture.
- 2. Test the magnet before mounting: Hold the magnet against the back of the print and feel how it holds. Because the supplied information does not state the magnet's strength, test it with the print still in your hand before relying on it vertically.
- 3. Place the print, then check stability: Set the print in position and give it a gentle nudge. If it shifts or feels loose, move it to a flatter spot or use the magnet only as a desk stand rather than a hanging method.
- 4. Keep the display spot dry: Stainless steel is resistant to rust, but the printed artwork layer is not described as waterproof. Avoid bathrooms, kitchen splash zones, and windows where condensation collects.
Display ideas that fit a 172mm x 240mm metal poster
- Desk or workspace companion: Lean the print against a monitor stand or a small shelf riser, using the magnet as a backing stop. At 172mm wide, it fits beside a keyboard without crowding your working area.
- Collector shelf: Place it among figures or art books where the metal surface can catch light. Keep it away from items that scratch, such as loose metal tools or rough figurine bases.
- Compact wall spot: A narrow wall section between shelves or above a small side table suits the 240mm height. Test the magnet's hold before leaving it unsupported overnight.
- Gift-ready display: Because delivery is scheduled for November 2026, plan a display spot before the print arrives so it does not sit in its packaging. The catalog does not describe gift packaging, so confirm that separately if gifting.
Cleaning the stainless steel print without damaging the artwork
The catalog does not supply a cleaning procedure, so keep it simple and conservative. Dust the surface with a dry, soft cloth. For fingerprints, use a cloth barely dampened with water and dry immediately. Avoid abrasive pads, scouring powders, and solvent cleaners, because the print relies on a multi-colour layered artwork surface and the supplied information does not confirm resistance to harsh chemicals.
Do not spray cleaner directly onto the print. Apply any moisture to the cloth first, then wipe gently. If the print has a visible smudge that does not come off with a damp cloth, stop rather than scrubbing; the catalog does not describe a deeper cleaning method, and scrubbing risks the printed layer.
Humidity and everyday protection
- Keep it out of splash zones: A stainless steel poster is not the same as a waterproof sign. The printed artwork layer is the vulnerable part, so avoid sinks, kettles, and open windows during rain.
- Watch for condensation: Cold metal can collect condensation in humid rooms. If you live in a humid climate, choose an indoor spot with steady air rather than a closed cabinet against an exterior wall.
- Handle by the edges: The catalog does not describe a protective coating, so lift the print by its edges and avoid pressing on the artwork face.
- Store flat if not displayed: If you need to put the print away, keep it flat and dry. The supplied information does not describe a storage sleeve or frame, so do not assume one is included.
Two print variants: what the catalog settles and what it does not
The Ludens Character Metal Print is offered in two print variants, A and B. The supplied catalog lists the option type as Print and the variants by name, but it does not describe a design, colour, or artwork difference between them. Choose by the variant label your order requires, and ask the store directly if you need to know what distinguishes A from B. Do not assume one variant is larger or uses different materials; the supplied size and construction facts apply to the product record, not to a specific variant.
- Confirmed: Two print variants exist: A and B.
- Confirmed: The product is a 172mm x 240mm x 1mm stainless steel poster with an included magnet.
- Not confirmed: The visual or design difference between variant A and variant B is not described in the supplied information.
Before you pre-order
The Ludens Character Metal Print is only available on pre-order, with delivery scheduled for November 2026. That makes it a plan-ahead purchase rather than an instant display piece. Decide where it will live before it arrives, and check that your chosen spot is dry, stable, and away from scratching hazards.
If you are buying it as a gift, confirm the delivery window with the recipient's timeline. The catalog does not describe gift wrapping or a display stand beyond the included magnet, so keep your expectations tied to what is listed: a stainless steel poster, a magnet, and the 10th Anniversary Ludens artwork.


