How to Keep Embroidered Logos Looking Sharp on Kojima Productions Apparel

Quick answer

Wash embroidered Kojima Productions apparel inside out in cold water on a gentle cycle, skip fabric softener and the dryer, and press only the back of the embroidery with low heat. If the stitching is already snagged or the backing is crumbling, stop ironing and treat it as a repair rather than a cleaning problem.

Embroidery is the most durable decoration on most gaming apparel, but it is not indestructible. Heat, agitation, and the wrong laundry products break down the thread and the backing faster than normal wear ever will.

This guide separates what you are seeing from what likely caused it, gives the corrective step, and tells you when to stop and choose a different option. It applies to any embroidered piece in the Kojima Productions range, from a KOJIMA PRODUCTIONS Logo T-Shirt to the heavier DEATH STRANDING BB Hoodie.

Symptom: the embroidery looks fuzzy or dull

Fuzziness usually means the thread fibers have been abraded by tumbling against other garments or by a dryer cycle. It is surface damage, not a structural failure, so it responds well to a change in routine rather than a repair.

Switch to washing inside out on a gentle cycle with like colors, and air-dry the piece flat or on a line. A fine-tooth comb or soft brush can lift the nap back into line, but do not pull individual stitches.

• Wash embroidered items separately from zippers, hooks, and heavy denim.
• Skip fabric softener and dryer sheets; they coat the thread and flatten the sheen.

Symptom: the logo is fading or the color looks washed out

Fading on embroidery is almost always a heat or chemistry problem. Hot water, a hot dryer, and chlorine bleach attack the dye in the thread, and the effect is cumulative rather than reversible.

There is no reliable way to re-dye embroidery at home without risking the surrounding fabric. Once the color has gone, the practical fix is prevention on the next piece: cold water, no bleach, and air-drying.

• Use a color-safe, bleach-free detergent.
• Turn the garment inside out before it goes in the machine.

Symptom: stitches are snagged, loose, or pulling

A snag is mechanical damage, not a cleaning issue. It happens when the embroidery catches on a zipper, a watch, a bag strap, or the drum of an overloaded machine.

Do not cut a loose thread flush with the fabric; that can unravel the run. Instead, use a blunt needle to work the loop back to the underside, then secure it with a tiny dot of fabric-safe adhesive if needed.

• Wash embroidered pieces in a mesh laundry bag.
• Keep the load loose so the drum does not drag on the stitching.

Symptom: the backing feels stiff, crumbly, or scratchy

The backing, or stabilizer, is what keeps embroidery from distorting the fabric. It can stiffen with heat or break down over many hot washes, and once it crumbles the logo can pucker.

This is the point to stop home treatment. Further ironing will press the breakdown into the fabric, and a repair is a job for a tailor or an embroidery shop, not a laundry routine.

• Never iron directly on the front of the embroidery.
• If the backing is failing, treat the piece as a repair candidate, not a cleaning one.

Ironing and storage without flattening the logo

If you must press an embroidered garment, turn it inside out and iron the back of the embroidery on low heat over a pressing cloth. Direct heat on the front will flatten the raised stitching and can scorch synthetic thread.

For storage, fold along the body rather than across the logo, and hang heavier pieces like the DEATH STRANDING Silhouette Sweatshirt or DEATH STRANDING BB Hoodie so the embroidery is not compressed under other garments.

• Use low heat and no steam directly on embroidery.
• Hang rather than stack embroidered pieces when space allows.

Diagnosis chart: match the symptom to the fix

• Fuzzy or dull thread: Caused by abrasion in the wash or dryer. Wash inside out on gentle, air-dry, and brush the nap back into line. Stop if the fuzz does not lift after one gentle wash; the thread is worn, not dirty.
• Faded color: Caused by hot water, hot drying, or bleach. Switch to cold water, bleach-free detergent, and air-drying. Stop trying to restore color at home; fading is not reversible.
• Snagged or loose stitches: Caused by mechanical catching. Use a mesh bag, loosen the load, and work loops back to the underside with a blunt needle. Stop if multiple runs are loose; take it to an embroidery repair rather than cutting threads.
• Stiff or crumbling backing: Caused by heat and repeated hot washing breaking down the stabilizer. Avoid further ironing. Stop home treatment and treat it as a tailor or embroidery shop repair.

Where these care rules apply in the catalog

• KOJIMA PRODUCTIONS Logo T-Shirt: Official Kojima Productions merchandise with the Kojima Productions logo printed in white, available in four colors: Black, Charcoal, Navy, and Military Green, with sizes Small through X-Large depending on color. A lighter cotton tee dries fast and tolerates frequent gentle washing, so it is the easiest piece to keep sharp with a simple cold-wash, air-dry routine.
• DEATH STRANDING BB Hoodie: The BB print appears on either a t-shirt or pullover hoodie, and the hoodie is available in multiple sizes and colors. A pullover hoodie has more weight and more seams around the chest area, so it needs a looser wash load and mesh bag to protect any decoration from drum drag.
• KOJIMA PRODUCTIONS LUDENS Art Print T-Shirt: Official KOJIMA PRODUCTIONS merchandise featuring a Yoji Shinkawa Ludens design on a premium white shirt. A white base shows dye transfer and fading more clearly, so keep it away from bleach and wash it with similar light colors.

Most embroidery problems on Kojima Productions apparel come down to heat and agitation, and both are easy to remove from your routine. Wash cold, inside out, in a mesh bag, air-dry, and iron only the back of the stitching. If the damage is already structural, stop cleaning and start repairing.