How to Display the LUDENS 3D Post Card Without Damage

By Kojima Productions | Published: 2026-10-22

Category: How-to Guides

Learn how to safely display your KOJIMA PRODUCTIONS LUDENS 3D Post Card without bending, fading, or scratching the 3D surface. Follow these simple steps for long-lasting enjoyment.

Quick answer

Display your LUDENS 3D Post Card without damage by using an acid-free frame or a rigid sleeve, keeping it out of direct sunlight, and handling it only by the edges.

Why the LUDENS 3D Post Card needs special care

The KOJIMA PRODUCTIONS LUDENS 3D Post Card has a raised, textured surface that gives the logo a dimensional look. This 3D effect is delicate—bending the card can crease the printed layer, and pressure on the raised areas can flatten them permanently.

Because it is a paper-based collectible, it can also fade if exposed to strong light for long periods. The trade-off for that cool 3D appearance is that it requires more careful handling than a standard flat postcard.

Step-by-step display guide

Choose a rigid, acid-free frame or sleeve: Use a photo frame with a rigid back (not a flexible plastic sleeve) to keep the card flat. Make sure the frame is acid-free to prevent yellowing over time. A standard 4x6 inch frame fits the LUDENS 3D Post Card. Avoid magnetic or adhesive frames—they can stick to the 3D surface and peel the print.
Wash and dry your hands before handling: Oils and dirt from fingers can stain the card or leave marks that attract dust. If you must handle it, hold it by the edges only. Wearing cotton gloves is even better, but clean hands work fine for a quick display change.
Place the card in the frame without bending: Slide the card gently into the frame. If the fit is tight, do not force it—trim a thin strip from the frame's insert mat instead. Never bend the card to make it fit. If the card does not lie flat, remove it and try a different frame rather than pressing it down.
Hang or stand the frame away from direct sunlight: UV rays from windows can fade the printed logo and the card's paper within weeks. Choose a spot that gets indirect light or use UV-protective glass in the frame. Rotate the display every few months if you cannot avoid a bright room.
Dust the frame, not the card: Use a soft, dry microfiber cloth on the frame glass or sleeve. Never wipe the card itself—the 3D surface can snag or scratch. If dust gets inside, remove the card and gently blow it off. Avoid compressed air cans; the propellant can leave residue on the card.

Product facts

KOJIMA PRODUCTIONS LUDENS 3D Post Card: The KOJIMA PRODUCTIONS LUDENS 3D Post Card is a 3D greeting card featuring the KOJIMA PRODUCTIONS logo. The 3D surface is the main attraction but also the most vulnerable part—bending or pressing on it can ruin the dimensional effect.
KOJIMA PRODUCTIONS LUDENS 3D Post Card